Washing Machine Error Codes
Decode the message on your display and find out what to do next.
- Visit from ₹500
- Mon–Sun 8 AM–8 PM
- Doorstep service
Washing Machine Error Codes
Fully automatic washing machines show error codes to tell you what is wrong. The exact code differs by brand and model, so always check your manual, but the meanings below are common on popular machines.
LG washing machine error codes
Common codes on many LG machines. Your model may use slightly different codes.
| Code | Meaning | What to check |
|---|---|---|
| IE | Water inlet error | Check tap, inlet hose and filter; inlet valve may be faulty |
| OE | Drain error | Check drain filter, drain hose and pump |
| UE | Unbalanced load | Redistribute clothes and level the machine |
| dE / DE | Door open or lock error | Close the door properly; door lock may need service |
| FE | Overfill error | Inlet valve or pressure sensor may be faulty |
| PE | Pressure sensor error | Check sensor, hose and wiring |
| LE | Motor error | Motor, wiring or board may need testing |
| tE | Thermistor or heater error | Temperature sensor or heater needs testing |
Samsung washing machine error codes
Common codes on many Samsung machines. Letters can appear as C or E on different models.
| Code | Meaning | What to check |
|---|---|---|
| 4C / 4E | Water supply error | Check tap, hoses and inlet filter |
| 5C / 5E | Drain error | Clean drain filter and check pump and hose |
| UB / UE | Unbalanced load | Rearrange the load and level the machine |
| dC / dE | Door error | Close the door; check lock and latch |
| 3C / 3E | Motor error | Check motor, wiring and board |
| 1E | Water level sensor error | Check pressure sensor and wiring |
| HE | Heater error | Heater or sensor may be faulty |
| tE | Temperature sensor error | Sensor or wiring may need replacement |
Error types on other brands
Other brands use their own codes, but they fall into the same groups.
| Type of error | What it means | First checks |
|---|---|---|
| Water inlet | The machine is not getting water or takes too long to fill | Open the tap fully, clean the inlet filter, check the hose |
| Drain | Water does not leave the drum in time | Clean the drain filter, check the hose and pump |
| Door or lid | The door or lid is not detected as closed | Close it firmly, check the latch, lock or switch |
| Unbalance | The load is heavy on one side or the machine is not level | Redistribute clothes and level the machine |
| Motor | The motor is not turning at the expected speed | Check overload, belt, motor and driver |
| Sensor | A water-level or temperature sensor sends wrong readings | Check the sensor, wiring and connectors |
| Heater | The heating element or thermostat is faulty | Descale the machine; replace the heater if needed |
| Control board | The board is not responding properly | Switch off, wait and restart; service may be needed |
What to do when an error code appears
Note the code
Write down the code and take a photo of the display if you can.
Reset the machine
Switch off at the wall for a few minutes, then switch on again.
Do the basic checks
Check the tap, hoses, drain filter, door and the load balance.
Call us if it returns
Give us the brand, model and code. We will tell you what it usually means and arrange a visit.
Questions about this guide
Can I follow this guide for any brand?
Yes. The steps are general and apply to most machines, but always check your own manual for brand-specific instructions and limits.
My machine is not working properly even after following the guide. What now?
Call us on 78528 36173 between 8 AM and 8 PM, Monday to Sunday. Visit charges start from ₹500 and you get a quote before any repair starts.
How often should I service my washing machine?
A general service once a year is a good habit, and twice a year in hard-water areas.
Book a washing machine technician today
Call us any day from Monday to Sunday, 8 AM to 8 PM. Visit charges start from ₹500. Booking is by phone only, so just call and tell us the brand and the problem.